Sigma Quadro

Four very bright LEDs, a small handy case, and burn times up to 40 hours – these are the characteristics of the new Quadro. The unifit holder enables this handy light to be attached to any handlebar diameter. Choose from the three optional light modes: constant, flashing and rotating.
LED torch
4 super bright white LEDs
3 modes: constant, flashing, rotating
Extra long burn time, up to 40h
Click switch
Tool-free mounting
Unifit bracket 22-32mm
Water resistant
Simple tool-free battery change (3 x AAA)
Rubber-touch surface

Topeak Whitelite II

Sporting three powerful white LED’s and weighing a paltry 35g, the WhiteLite™is easy to bring along to ensure you'll get home safely after dark.
Rubber strap system mounts quickly to any handlebar.
Lamp 3 Bright LED’s
Battery CR2032 (2) (Included)
Control 2 Modes. Constant/Blinking
Burn Time (approx) 60 hrs
Lamp Housing Injection Molded Plastic
Luminous Intensity 0.8 (Lux/5M)/ 0.63 (Lux/10M)
Mount Rubber Strap Fits OS H/Bar

Incredibell Illuminator

I need a light and a bell, do you have any...?

Description: The Illuminator is a bell
and white LED light all in one. Comes
complete with batteries.
Color: Silver
Dome Diameter: 38mm (1.3")
Fits handlebars with 21.7mm to 22.5mm
(.85" - .89") outside diameters.

Knog Frog Strobe LED Light

Light emmiting diode lights have come a long way. These strobe froggies are very bright, small and efficient. They securely mount to handlebar, seatpost and keychain. They blink for attention and power savings or glow steady.

BURN TIME 80 hrs (flashing), 50 hrs (steady)

DIMENSIONS 80 x 35 x 42 mm

WEIGHT 19 grams (including batteries)

BATTERIES 2 coin cell - CR2032 included

LED SPECS Hi Powered surface mounted LED strobe system with lens

LIGHT OUTPUT 25 lumens

MODES 1. Strobe 2. DISCO Strobe 3. Strobe Pulse 4. Constant

Topeak HeadLux Helmet Light

Ride safe and be seen at night with the helmet light. Innovative double sided helmet mounted light shines white facing forward and red towards the rear and features 4 LEDs with wrap around lenses for visibility from all angles. Top mounted button controls constant and blinking modes.
Lamp 2 White LED’s and 2 Red LED’s
Battery CR2032 (2) (Included)
Control 3 Modes.
White Constant / Red Blinking
White Blinking / Red Blinking
White Constant / Red Constant
Burn Time (approx) 70 hrs / 100 hrs / 50 hrs
Lamp Housing Injection Molded Plastic
Luminous Intensity 1 (Lux/5M) / 0.6 (Lux/10M)
Mount Helmet
Size (L x W x H) 6.5 x 3.5 x 3 cm
2.6” x 1.4” x 1.2”
Weight 24 g / 0.84 oz (light only)

Blackburn Mars 1

This rear light fits standard reflector brackets. It packs four super-bright red LED's in a water resistant case that mounts via integrated belt clip, seatpost clamp or reflector/rear rack bracket.
Run Time (Steady/Flash): 150-240 hours
Batteries: 2 AAA included

Fibre Flare™ Tail Light

Specifically RED in colour to meet the regulatory requirements for 'rear lights' in most western
countries; the Fibre Flare™ Tail Light is the ultimate in rear light safety, providing excellent 180 degree + visibility from the rear. Use on its own, in pairs or in combination with Fibre Flare™ Side Lights (or your existing lights) to make sure you're seen on all angles. Fix it to your jersey, bag or bike.. reliable and always visible.
Note: If you ride in a bunch/group, Fibre Flare™ Tail Lights provide excellent visibility without blinding the rider behind you..
Mounting Tips:
•On your Frame.. Using silicone ladder slings...
•On your jersey.. This is best done using the Full Length version which is the perfect length to be
used on almost any jersey pocket.. Fasten one end to the jersey pocket and the other it the bottom hem
of the jersey. The clip is designed to hold tight without causing damage you jersey fabric and you can still easily get your bits in and out of your pocket.
•Using two Fibre Flare™ .. fix one to your centre jersey pocket and the other to your seat post. With both on the strobe program each unit will pulse with the other in a flashing sequence loop in a vertical line.. rear light safety at its best. Alternatively using two units mount them on your rear stays.

Fibre Flare Micro

The Micro Flare is the little brother of the acclaimed Fibre Flare. In fact Micro Flare is a Fibre Flare just shorter in length, a little more robust and uses the same trusty silicone ladder slings as its big brother. The primary difference apart from being shorter is that Micro Flare is powered by using CR2032 lithium coin cells instead of Alkaline AAA's. Micro Flare is also the most water resistant Fibre Flare yet. So much so that they recommend using it on water craft. Omnidirectional visibility: over 250m • 2 X CR2032 Lithium 3 volt coin cell • Lightweight: 45g • Flashing or constant light • 75 hours burn time in flashing mode • Can be mounted almost anywhere: bike frame, jersey, backpack, fork, seat post, etc. • Two silicone attachment slings included

Serfas TL-ST Seat Stay Taillight

See what all the buzz is about:

•One 1/2 Watt Center Red LED and 6 additional Red LEDs

•Steady, Flashing, Strobe, Rolling Strobe, and Flashing Strobe modes

•Water Resistant Silicone Body

•Mounts anywhere on your bike or helmet •Designed for the Seat Stay

•Entire Light Body Illuminates

•2 Lithium Ion CR 2032 Batteries included