Lube

Finishline Ceramic Wax Lube

Ceramic Lubes are lubricants that have been engineered with the latest development in lubrication technology - some pretty intense nano chemestry that has combined ceramic platelets with fluoropolymers to deliver extremely impressive performance. Ceramic WET™ is Finish Line’s most advanced and most effective wet-style racing lubricant. This full synthetic lubricant is enhanced with a nano-sized platelets of ceramic boron nitride and micron particles of fluoropolymer. It builds a ceramic coating on the frictional surfaces. You'll immediately notice an unequalled smoothness and quietness.
Ceramic-WAX is an advanced wax-based lubricant featuring the same ceramic/fluoropolymer technology. Ceramic WAX goes on wet, but dries to a hard, dry wax lube that ensures total drivetrain cleanliness - there is no 'wetness' or stickiness on your chain or parts, so dirt or grime are not attracted or absorbed by the lubricant.

Finishline Ceramic Wet Lube

Use Ceramic Wet for longer distances or wetter riding conditions, Use ceramic Wax for drier conditions where dirt attraction is a concern.

Finishline Dry Teflon Lube

Dry Lubes are those that go on wet, penetrate, and then set up in a dry state. Finish Line DRY Lube made with Teflon® fluoropolymer was the first lube of this type. It has become the best-selling dry lube in the bicycle market.
By setting up in a non-liquid state, a Dry Lube does not attract dirt to the drivetrain. You can ride through some pretty dusty, dirty conditions and the drivetrain will not turn into a greasy, grimy mess of grinding paste.
The disadvantage of Dry Lubes: they have low water resistance and will wear quickly in rainy conditions or on rides with multiple deep stream crossings. The hot tip with a dry lube is to lube the night before your ride, to allow the lube to fully set up and dry so you have minimum dirt attraction during your ride.

Finishline Wet Lubricant

A Wet Lube is a traditional oily lube that goes on wet and stays wet. It features excellent water resistance, film strength and long-lasting performance. Finish Line’s WET Lubricant is regarded by many to be the best of the Wet Lubes.
A Wet Lube will also perform better in muddy, off-road conditions because it will hold out more of the mud and crud due to its high water resistance.
With a Wet Lube, when you suspect that you will be riding in dry, dusty conditions, always wipe down the outside of the chain, removing any excess lube to minimize the accumulation of dirt into the drivetrain.

Finishline Synthetic Grease

Reformulated to exceed the unique and demanding requirements of bicycle bearings. Super Slick and made with Teflon® fluoropolymers. This 100% synthetic oil grease coats ball bearings and races, preventing wear and distortion in headsets and bottom brackets, even in brutal down hill racing and over extended periods of time. Chosen since 1988 by more top pro teams as the slickest, toughest bicycle grease available. No matter how hard or long you ride, Finish Line Premium Grease will provide the lubrication your bearings require.

Finishline Ceramic Grease: Advanced Bearing Lubrication

Finish Line's Ceramic Grease represents Finish Line's most advanced bearing lubrication technology. Formulated with sub-micron ceramic particles, Teflon® fluoropolymer and premium non-toxic synthetic oils. Guaranteed to optimize the performance and efficiency of bottom brackets, hubs and headset bearings. As bearings become coated with Teflon and ceramic particles, friction and heat is dissipated. Bearings last longer and run quieter and smoother. Prevents rusting even when exposed to salt water! Excellent on stems & posts as well as cables and threaded assemblies. Safety, Health and The Environment: Finish Line’s Ceramic Grease features an Inherently Biodegradable formulation which means that between 20% and 60% of the product’s base oils will degrade within 28 days. This product is non-toxic when used in quantities and applications as intended and contains no carcinogenic or hazardous air polluting (HAP) ingredients and emits no Volatile Organic Compounds (VOCs). Ceramic Grease is REACH compliant for Europe and all ingredients used are listed with all major worldwide chemical inventories which means that this product, like all finish Line products, conforms to all environmental regulations for use as intended. Finish Line Ceramic Grease contains no artificial dyes or fragrances, is non-flammable and is packaged in recyclable plastic tubes and tubs.

Finishline Long Reach Grease Gun

Grease Injection Pump Gun Works with all grease injection ports. Great for delivering grease right where you want it when lubricating pedals, hubs bottom brackets, headsets, crank bolts, etc. Helps prevent grease contamination, which is common with open tubs and finger application. Compatible with all standard tubes of grease, including Finish Line’s.
Easy one hand operation
• Ideal for delivering measured amounts of grease into hard to reach places.
• Long tip for recessed suspension pivots
• Helps prevent grease contamination
• Great for lubricating pedals, hubs, threaded parts, headsets, crank bolts, etc.

Finishline Extreme Fluoro Grease Syringe

Extreme Fluoro Grease is made with 100% pure DuPont fluorinated ingredients. Recommended for precision parts and especially bearings (including ceramic). Perfect for those seeking a significant drop in friction and maximum protection against extreme pressures and/or extreme rotational heat. Also works great on cable wires, derailleur pivots, stanchions, gaskets, pedal springs and as a 'clean' alternative to conventional anti-seize compounds. Extreme Fluoro often provides 'lubricated for life'
protection!
• Pure Fluorinated PFPAE Grease
• DuPont's most advanced grease
• Perfect for Ceramic Bearings
• Approved for S&S Couplers

Finishline Super Bike Wash

Easy & Fast Clean Up! Super Bike Wash™ will quickly clean dirt, clay, road grime and chain soils off your bike with little to no scrubbing. Five different cleaning agents work together to create a high speed cleaning system. Two different rust and oxidation inhibitors protect metal surfaces and prevent flash rusting. Super Bike Wash™ is a complex bio-cleaning compound. It is not a soap or detergent and it does not contain chlorinated solvents, phosphates, benzenes, or napthas, which can damage bicycle components and/or the environment. Safe for all surfaces of a bike. Great for ATV’s, motocross, boats, and more!
Safety, Health and The Environment: Finish Line Super Bike Wash features a Readily Biodegradable formulation which means that more than 60% of the product’s base oils will degrade within 28 days . Super Bike Wash is non-corrosive and when used in quantities and applications as intended, is non-toxic. Super Bike Wash contains no phosphates, butoxyethanol or ozone depleting compounds that are common to similar cleaning products. Finish Line Super Bike Wash contains no carcogenic elements or hazardous air pollutants (HAPs) ingredients and is 100% California Air Regulatory Board (CARB) Compliant. All Super Bike Wash is packaged in recyclable PET plastic bottles and jugs.

Finishline Showroom Polish & Protectant

Finish Line's Bike Polish made with Teflon® fluoropolymer uses DuPont™ Teflon® Surface Protector technology. Provides a brilliant shine plus long term protection on all surfaces of a bicycle including steel, aluminum, carbon fiber, titanium, chrome and clear coat. Contains NO abrasives. 100% safe for all plastics, rubbers and carbon fiber parts.
• The only bike polish formulated with DuPont Teflon® Surface Protector
• Restores and polishes all types of surfaces including clear coat and chrome
• New high gloss Teflon® fluoropolymers repel dirt and grime for easier post-ride clean-ups
• Helps prevent rust and minimize UV damage Safety, Health and The Environment: Finish Line’s Showroom Polish features a Readily Biodegradable formulation means that more than 60% of the product’ will degrade within 28 days of being exposed to the outside environment. Showroom Polish is non-corrosive and non-toxic when used in quantities and applications as intended and contains no phosphates, butoxyethanol or ozone depleting compounds that are common to similar cleaning products.

Finishline Multi Degreaser (EcoTech2™)

Strong, yet safe. A new technology degreaser that quickly cleans without damage to plastic or rubber components. Strong enough for the grimiest metal parts, yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces, etc. Exceeds all V.O.C. and California CARB regs.
Safety, Health and The Environment: Finish Line’s Multi-Degreaser features uses an exciting leading edge soybean extracted cleaning fluid which is renewable and sustainable and as such is a Readily Biodegradable formulation.., which means that more than 60% of the product will degrade within 28 days when exposed to the outside environment. Multi-Degreaser is non-toxic when used in quantities and applications as intended and contains no carcinogenic or hazardous air polluting (HAP) ingredients. Additionally, Multi-Degreaser is REACH compliant for Europe and all ingredients used are listed with all major worldwide chemical inventories and as such conforms to all environmental regulations for its use as intended. Multi-Degreaser is flammable and contains VOC’s and as such should be used with caution and in a well ventilated area. Multi-Degreaser contains no artificial dyes or fragrances and is packaged in either recyclable HDPE #2 plastic bottles or recyclable steel cans with no CFCs or ozone depleting propellants used.

Motorex Power Brake Clean

Powerful acting cleaning spray
Quickly and easily removes oil, grease, brake
fluid and dirt from brake rotors, pads and other
components
Does not affect rubber, plastic or paint

Finishline Stanchion Lube

End fork stiction, improve shock performance and preserve seals. This high performance fluoropolymer oil makes everything more slippery even teflon. Wipe it onto your fork stanchions and see for yourself.

Finishline Anti-Seize Assembly Lubricant

Prevents cold-welding, galling, and seizing of metal to metal contact parts, especially those subject to extreme pressures and moist conditions such as bolt threads, seatposts, pedals, bottom brackets, etc. For all metals, but essential when attaching reactive metals like titanium, aluminum, and specialty alloys and magnesium.
Anti Seize Bicycle Assembly Lubricant Videos
• Prevents cold welding, galling and seizing of threaded parts
• Excellent for use on parts subjected to extreme pressures and moist conditions
• Use on all metals; aluminum, titanium, carbon steel, magnesium

Finishline Fiber Grip

Fiber Grip™ is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. Fiber Grip eliminates the need to over tighten clamps to achieve secure connections. Over tightening can cause internal fractures and fatigue of carbon fiber parts. Apply Fiber Grip in a thin film to clamping areas of stems, handlebars, seat posts, and seat tubes. Tested and approved by leading carbon fiber component manufacturers.
Safety, Health and The Environment: Finish Line’s Fiber Grip features an Inherently Biodegradable formulation which means that between 20% and 60% of the product will degrade within 28 days of being exposed to the outside environment. Fiber Grip is non-toxic when used in quantities and applications as intended and contains no carcinogenic or hazardous air polluting (HAP) ingredients. Additionally, this product emits no Volatile Organic Compounds (VOCs). Fiber Grip is REACH compliant for Europe and all ingredients used are listed with all major worldwide chemical inventories which means that this product, like all Finish Line Products, conforms to all environmental regulations for use as intended. Fiber Grip contains no artificial dyes or fragrances, is non-flammable and is packaged in recyclable plastic tubes and tubs.

Motorex Copper Disc Compound

MOTOREX COPPER DISC COMPOUND $25
Helps eliminate disc brake squeal and boost performance Copper compound for use at temperatures from -40 °C and +1200 °C. Prevents threaded studs and nuts from seizing. Resistant to fretting corrosion and vibration
Benefits
forms reliable protection against metal contact
prevents threaded studs and nuts from seizing
excellent high-pressure characteristics, even with slow movements