Bottom Bracket Tools

Park Tool CCP-22 Crank Puller for Square Taper Cranks

The CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt Strong rotating tip system ensures smooth operation and long life.

Park Tool CCW-5 Crank Wrench

The CCW-5 features both a 14mm socket and 8mm hex wrench on a long, comfortable handle.

Super B Coterless Crank Tool

14 mm socket & 15 mm spanner. 6/8 mm hex key wrench.

Park Tool BBT-22

Bottom Bracket Tool The BBT-22 is a shop quality tool for installing and removing Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup. Can be used with a 3/8” drive torque wrench, 3/8” ratchet driver, 32mm wrench, FRW-1 Freewheel Remover Wrench, or 1” wrench. The BBT-22 replaced the BBT-2, and will fit all bottom brackets serviced by the BBT-2. The twenty tooth pattern is used on a wide variety of bottom brackets, including models from Shimano®, Truvativ®, Race Face®, FSA®, and others. The tool clears the oversized spindles of ISIS Drive and Octalink. Below is a sampling of the types of cups and rings serviced by the tool.